Model No.: SN20150827100943258
This machine is a highperformance presentation scaler and switcher. It accepts one of eight inputs: one DVI, two VGA, one composite video and four HDMI signals. The HDMI1, HDMI2 to bypass the input function, supports input resolutions up to 4Kx2K@30Hz, and HDMI3, HDMI4, DVI,
VGA1, VGA2, CV scales the video, supports output resolutions up to 1920x1080P@60Hz. It scales the video, embeds the audio, and simultaneously outputs the signal to HDMI and HDBaseT output, HDBaseT output transmission distances up to 328ft/100m (100m Version) through CAT6/7 cable, together with S/PDIF and stereo audio outputs. Flexible control mode diversity, through the front panel button, remote control, RS-232 and TCP/TP control.
lHDMI, HDCP and DVI compliant
l The HDMI1,HDMI2 to bypass the input function, supports input resolutions up to 4Kx2K@30Hz
l The HDMI3,HDMI4,DVI,VGA1,VGA2,CV scales the video, supports input resolutions :
HDMI: 480i to 1080p
VGA:1920x 1080P@60Hz, 1360 x 768P@60Hz, 1280 x 1024P@60Hz,
1024 x 768P@60Hz,1280 x 720P@60Hz,1280 x 768P@60Hz,
800 x 600@60Hz, 640 x 480P@60Hz, 720 x 400P@85Hz
CV: Supports PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard TV formats
l Supports transmission distances up to 328ft/100m (100m Version) through CAT6/7 cable
l Supports POE function
l VGA video supports YPbPr and RGBHV
l Picture Adjustment Settings
l Supports embeds the audio
l Supports S/PDIF and stereo audio outputs
l Supports HDBaseT LAN Serving function
l The USB and RS-232 for the firmware update
l Supports RS-232, remote control, on-panel control and TCP/IP Control
l Supports smart EDID management
Part 1. IR: IR Receiver window (accepts the remote control signal of this device only).
POWER: Press this button to power the device standby on/off. Press this button more than 2 seconds, the device has reached the standby mode. The LED will illuminate green when the power is on, red when it is in 'Standby' mode.
LOCK: Press this button to lock all the buttons on the panel, press again to unlock.
AUDIO SELECT: Press this button to select audio from digital(INT) or analog(EXT),When the signal is HDMI input.
Note: DVI interface as HDMI input has the same function.
Part 2. HDMI INPUT BYPASS: Press these buttons to switch directly to the required source. An LED will illuminate to indicate the selected input source.
Part 3. SCALER SELECT:
1. Source select: Press these buttons to switch directly to the required source. An LED will illuminate to indicate the selected input source.
2. Picture adjustment: Press scaler or auto adjust button to adjust the output picture.
Note: a. The output signal source must be VGA input source.
b. Scaler adjust the step: six steps
3. Resolution select: Press the button to select different resolution output. An LED will illuminate to indicate the selected resolution.
Contact us if you need more details on HDMI Extender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about All to HDMI Extender、100m CAT6 Extender. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : HDMI Extender